Don't know if anyone is RedBus or anyone else is listening but I thought it might be nice to have a thread for suggestions.
- Allow the "Remote" layer status button to cycle through the Remote "control" options that have been created in the "External Control List."
- In the "Routing:Output" and "Routing:Output Slot" - "Source Select Lists" add a couple of new options:
- Allow the "Remote" layer status button to cycle through the Remote "control" options that have been created in the "External Control List."
- In the "Routing:Output" and "Routing:Output Slot" - "Source Select Lists" add a couple of new options:
- Control Room out (mirroring any source selected in the upper right-hand side of the mixer)
- Stereo Out Control Room (Same as stereo out, but affected by solos and mutes)
This would allow for digital converters to be used for monitoring in the control room without losing solo and mute function. As is, only the hardare analog outs function in this way.
- Mirror sources of other outputs. This is tough to explain, but I'll try...
Issues that you would have to overcome to implement: In the source select list, you would have the option to mirror any other terminal output's selection. For example, if you always wanted TDIF1 trk1 to have the same source input as SLOT1 trk 1, you would choose" mirror SLOT1 trk 1 " as the source for TDIF1 trk1. If SLOT1 trk 1's source were to change, a TDIF1 trk 1 would be automatically be changed to reflect the new source.
-A mirror couldn't reflect what it is mirroring, so it would have to post an error message to the user if the user attepted to do so.
-Names like "mirror SLOT1 trk 1" would be too long t0 fit in the current field so some abbreviations and/or spacing issues would have to be addressed.
-Names like "mirror SLOT1 trk 1" would be too long t0 fit in the current field so some abbreviations and/or spacing issues would have to be addressed.
