HELP: No soud through PC or through Cubase

[shirak]

What do I use: DM3200 + MKII

I cannot hear anything coming out of my speakers though my PC. This is also the case when I play something through Cubase.

Can someone help me with this issue?

 

[Headroom]

You'll have to be more specific if you want to get an answer. Tell us more about your configuration and setup and you will get a lot of help. I.e. mackie controls, Asio driver, routing in your DM, etc.
Gr
Frans

 

[cmaffia]

This will point you in the direction for setting up VST connections in Cubase.
http://www.tascamforums.com/threads/help-on-routing-tascam-dm3200-with-cubase-7-5-8-0.3770/

Follow these instructions for setting up Cubase and Remote Layer.
http://www.teacmexico.net/TASCAM/site/mixers/dm3200_updates/dm3200_steinberg_v110.pdf

 

[shirak]

Hi,

Setting up VST connection as well as Cubase and Remote Layer worked already, but the problem is that I caanot hear anything coming out of my PC. I only hear sound when I play from my keyboards through M/L.

I think I have to do something with routing within the mixer or try to re-install the drivers . I will let you know guys! I meanwhile, suggestions are welcome

 

[cmaffia]

Did you route Cubase to 2 channels back to to the DM through your firewire card? Most of us monitor our DAW through channels 31 and 32. Make sure you send both of those channels to the STEREO buss or else you will hear nothing. You need to make the stereo output buss in the Cubase VST connections (31 & 32). Sounds like you really need to read the manuals for both the DM and Cubase.

 

[shirak]

I got it working cmaffia, thnx

 

[cmaffia]

Great news! What was the fix?

 

[shirak]

The fix was assigning (in my case) slot 1-1 to CH31 and slot 1-2 to CH32.

 

[cmaffia]

Bingo!