Complete newbie

If I set up like that , do you think the x under state will turn back to arrows like in my screenshot
 

Attachments

  • Remote MC.png
    Remote MC.png
    25 KB · Views: 5
@Eifion Well, we are going to find out once you have setup everything properly on both ends DAW and DM
 
  • Like
Reactions: Eifion
Update @Peter Batah the stereo fader is working ...i do have some other issues also , it is showing up that I have no cf card and that there is no firewire cable connected
 

Attachments

  • Screenshot_20241117_113226_Messenger.jpg
    Screenshot_20241117_113226_Messenger.jpg
    31.3 KB · Views: 8
  • Screenshot_20241117_113219_Messenger.jpg
    Screenshot_20241117_113219_Messenger.jpg
    29.5 KB · Views: 7
@Eifion The pics aren't great. However, the first seems to indicate that there is no CF card present. And, the second pic is telling me that your FW card is not connected properly. Please verify / replace bot FW and USB cable for starters
 
Hiya @Peter Batah .... yes I immediately checked cables , they are fine ...the cf card that came with desk was a 1gb cf card , I purchased a 256mb cf card as I'd read there were issues with larger cards , with either card I am unable to format , unless I've installed it incorrectly, but I've tried several times , and machine is good and clean no dust
 
@Eifion Here are my screenshots that match up with the ones that you sent me. Are you able to bring up the meter bridge from within TMC. You should really sort out the connection issues before we can move on. USB in particular.

Is this a Windows PC that you are using
Have you tried using the different USB ports (2.0 / 3.0)
What does your Studio One External Devices setting look like
Have the Tascam drivers been properly installed on the PC. Try re-installing them
Do you have another PC kicking around. An older laptop perhaps.
Have you tried another DAW. Install a trial version of Cubase for example
As far as the CF is concerned. You might try formatting it elsewhere. PC card slot for eg.

System - Utility.png


Digital - SLOT 1-2.png


TMC - Meter Bridge.jpg

Studio One - External Devices.jpg
 
Last edited:
@Eifion Windows 10 Pro device manager

Device Manager.jpg
 
@Peter Batah i'll try all the suggestions , I'll have a look at the drivers . I did try updating firmware from tascam companion and it kept timing out

Tascam companion software
Firewire card driver ....update via device manager
Dm3200 firmware....update via tascam conpanion

Am I missing anything , sorry for all the questions , I've come from mixing in the box with audio interface and faderports....this was an offer I couldn't pass up....
 
@Eifion No need to apologize. We've all been there. I will in the studio in approx. 30 minutes. If I can think of anything else I will post back. In the meantime I wouldn't rule out removing / re-installing all pertinent drivers / utilities. The tascam port have to appear in your DAW. All ports are available to me in the DAW's that I use, or have used. Cubase, Studio One, Pro Tools, etc...
 
@Eifion How are we looking here:

MIDI - Setup.png

TMC - About.jpg
 

New threads

Members online

No members online now.