(continuation of the other post) Auto Repair NO/EXIT on the screen and turning the machine back on after a while that the HD flashes everything stops and the writing reappears. I did a forced shutdown, restarted everything, unplugged, unplugged all the power, nothing. The writing remains as soon as it turns on. Now I ask you, what should I do? Can you give me an answer? Thank you very much
Good evening, I'm Francesco Trotti, I work with a TASCAM Neo 2488. Yesterday afternoon while I was working, I connected the USB cable to insert a track into the fat, the problem is that while I was inserting the track and after having inserted it into the fat from the PC, the TASCAM went into a block writing, (next post follows because it's too long)
(il continuo dell'altro post) Auto Repair NO/EXIT sullo schermo e riaccendendo la macchina dopo un pò che l'HD lampeggia si ferma tutto e ricompare la scritta. Ho fatto l'arresto forzato, il riavvio di tutto, staccato la spina, staccato tutta la corrente, nulla. Rimane la scritta appena si accende. Ora vi chiedo, cosa devo fare? Potete darmi una risposta? Grazie mille
Buonasera, sono Francesco Trotti, lavoro con un Neo 2488 della TASCAM. Ieri pomeriggio mentre stavo lavorando, ho collegato il cavo usb per far inserire nella fat una traccia, il problema è che mentre stavo inserendo la traccia e dopo averla inserita nella fat dal pc, il TASCAM è andato in blocco scrivendo, (segue il prossimo post perchè troppo lungo)