Tascam DP03

[Banjaxed]

Hi,

I am fairly new to this forum and I have taken on board the necessity to RTM.
After reading the instructions many times I am at a loss where to turn next.
I am trying to import a track in the correct format but I keep experiencing the
same problem. I connect to my PC drag and drop the file into the Wave folder
then rename the file and try to load the song. The song appears fine but when
I press the execute button Nothing happens. I have read the manual over and
over but I am at a loss where to turn next. If I have a faulty recorder then I will
have to live with it but if anyone can shed any light on my problem then I would
be very grateful.

 

[Mark Richards]

@Banjaxed.
I'm not an owner of this particular portastudio, but looking at the owner manual, there's no explicit mention in the Import instructions of a key step: first needing to create a new song or open a previously created song. (Typical TASCAM technical writer incompetence strikes again. )

So in broad strokes it appears there would be a 3 step process (create song; transfer file from PC to SD card; open song and Import file to song track-probably via a menu option.
----------------------------------------------
EDIT
I made time to read the detailed Import steps on page 63 of the Owner Manual. Import is in fact a menu driven function, explained step by step, that should import a desired .wav file into a desired track of a previously or newly created song. So once the song is created and the file transfer is completed, steps 1 through 9 on page 63 should achieve the desired result.

Also, there's likely a limit on the number of characters in the name of the file being imported beyond which the firmware will not recognize the file. Check your owner manual for any information about that. If in doubt, limit the import file name to the default number of characters used by the firmware to name songs.
---------------------------------------------

@Banjaxed, if that solves the problem, please let us know so that knowledge/information will be available to the community going forward.

 

[shredd]

Typical TASCAM technical writer incompetence strikes again.

It's a crime against nature (or at least musicians): the last really solid, utile, informative TASCAM manual I've seen was for my 2488neo (released nearly 20 years ago). The manual for my O/G DP-32 (about 10 yrs old) is serviceable - though can't hold a candle to Phil T's User Guide - but the one for my '008 is laughable.

Nowadays - it seems like most of their manuals are written by people who were cleaning the toilets that morning, and spent the afternoon learning English from a box of Cheerios...

 

[MichaelDuke]

The manual for the DP-03 is actually pretty good, but then again I haven't tried to import tracks like the OP is wanting to do.

 

[Mark Richards]

The problem with most of the current TASCAM owner manuals is that they aren't written for people who are new to Multitrack recording, and can at times be more confusing than helpful, for a number of different reasons. Here's an example of the excellent writing quality and content for which TASCAM's manuals once were known.