Tarjeta SD

[Norberto61]

Buen día a todos.
¿Alguien puede ayudarme con lo siguiente? Tengo una DR 40 y no me lee ninguna tarjeta sd, me pide que la cambie. En algún otro momento me salia un cartel de error. Al no poder leer la tarjeta no la puedo formatear con la Tascam. La formatee en la computadora pero el Rascam no me reconoce la tarjeta.
Si alguien me ayuda con esto se lo agradezco.
Saludos
Norberto

 

[Mark Richards]

Welcome to the forums, @Norberto61.

I'm not familiar with your recorder, but in general, these are fundamental things to consider:
1. Use only TASCAM tested/approved cards (see the owner manual & TASCAM website "Support" section for your recorder).
2. Assure the card is within the required size capacity for the unit (see the owner manual).
3. Once 1 & 2 are accomplished, upgrade the firmware to most current release.

That usually resolves the type of issue you've described.

It would be helpful also to know the exact language of the error messages and the suggested corrective measures found in the "Troubleshooting" section of your owner manual. That could help focus in on finding a solution if the above steps don't resolve the problem.