Ok, another one..HELP! No output from RCA jacks out to Studio on DM-24

[TSarbo]

No matter what I try (from deep in the manual), I can't get any output to the 'Studio' RCA (-10dbv) jacks
that are just under the CR outputs, which are patched to the CR speakers.

I know where in the menus to set either "from CR" or "Studio Output" options to get to these jacks, but nothing
shows up. My goal is to send "Stereo" to these jacks.

So far, my workaround, which works OK, is to send the Studio the outputs from a headphone jack, so I can control
the volume with the headphone volume knob, and this lets me send T/B to the studio.

 

[BatterDave]

I believe that you also use pod 4 to turn up the studio volume? Only from that menu. It is separate from control room volume. So you are selecting stereo from the options and adjust volume?

 

[TSarbo]

Thanks, but that didn't work. Yes, I'm in that menu where I set the Studio Output to be
"Stereo". Pod 4 in that menu controls (says the manual) the volume to those RCA jacks,
but I put it full volume and still got no signal. I'm using the cables that send headphone
out to the studio, so I know the cables are good.

Looking at the big IN/OUT diagram, I'm guessing the D/A converters there don't work.