DM-4800 How can I route an External Multi-Effect?

[SYNTHESIA]

How can an external multi-effect processor be routed to 2 channels in the DM-4800, where the effect component is adjustable?
Is it possible with the aux send and return connections?
It works fine with the internal effects, but with external effects I just don't know what to set in the DM.

 

[Peter Batah]

@SYNTHESIA Pages 12+ of the user manual read:

External effects can be looped through the assignable
analog sends and returns (the returns can then be
assigned to channels), or kept in the digital domain
by using the stereo digital I/O facilities.

There are also analog inserts associated with each
mic/line input, which allow additional processors to
be inserted, before the DA converters. These insert
points can also be used to bypass the DM-4800’s
internal mic amps and patch in external mic amps.

This may be of some help as well. Brought to you by: @Rockum

Tascam DM3200 DM4800 Hardward and Soft Inserts

 

[SYNTHESIA]

@ Peter Batah; Thank you for your reply, but I am aware of the information on page 12.
I don't know what I have to set in the menus. Is there perhaps a guide somewhere with step-by-step pictures?

 

[Peter Batah]

@SYNTHESIA Was the YT video helpful or not? You can always try reaching out to one of the DM gurus who peruse the Forum content on occasion. I, personally have not used external processing. Sorry that I cannot be of more assistance.